How can a shower head increase water pressure? First of all, check whether the hole of the showerhead is blocked, if the water pressure is reduced due to dirt, you can clean the nozzle after soaking it with vinegar.
You can also choose to directly replace the showerhead for booster, booster shower head as the name implies is a nozzle with enhanced water pressure effect, not only can solve the problem of small shower water flow, but also avoid sudden hot and cold in the bathing process.
In addition, you can also install a home water pressure booster pump to pressurize the waterway.
1、Replacement of booster shower head
The booster shower head as the name implies is a nozzle with enhanced water pressure effect, originally designed for the lack of water pressure at home.
Its working principle is: the installation of the energy-saving booster into the water device at the end of the shower and the shower handle Wen’s hole, when the water enters the shower, the outside air pressure to force the water to speed up the water, so as to enhance the speed of about 30% of the water, the effect of automatic pressurization 30%.
Simply put, it allows the air and water to mix so that the internal pressure of the water flow increases, which in turn creates a high-speed water flow. The booster shower head can not only solve the problem of small shower water flow but also avoid sudden heat and cold during the shower.
In addition, the booster head can be intelligent flow restriction, according to the size of the water pressure automatically adjusts the water inlet area, the water pressure is small when the water inlet area is open, so that the water balance, both to increase pressure, but also to save water.
2, The installation of a home water pressure booster pump
Showerhead water pressure is not enough, it is likely that the family tap water pressure would have been particularly low, the more effective solution, in this case, is to install a home water pressure booster pump.
A water pressure booster pump is, as the name suggests, the object used to enhance the water pressure at home. Its use is mainly water heater booster, sauna, bath booster, the uppermost layer of the apartment water pressure is not enough to pressurize, solar energy automatic booster, high-rise residential or water peak water pressure and other water pressure requirements of the occasion with. After experiments have proved that its pressure-boosting effect is very significant.
It is best to booster pump with another 600-800 pounds of a pressure tank, which is more power saving. After this treatment, not only the shower head water pressure will be enhanced, all other water equipment in the home will also work properly, such as a washbasin, sink water pressure.
3, Check the water circuit as well as clean the nozzle
If the showerhead is used for a long time, the holes of the nozzle will be clogged with deposits of dirt, resulting in reduced water flow and lower water pressure. In this case, the nozzle can be cleaned first, with vinegar soak after cleaning will be more effective. If the cleaning is really not clean, directly replace a new nozzle can be.
In addition, the tap water valve is not completely open, or the existence of blockage, will also lead to a reduction in water, water pressure received. In this case, you can check yourself to troubleshoot.
The above is all about how to improve the water pressure of the showerhead, I hope it will help you.
