When buying garden watering can experienced salesmen-consultants recommend buying additional nozzles Of course, not all buyers pay attention to these tips, and only when faced with watering they understand that they should listen to the seller.
On the one hand, for watering large bushes, nozzles are not needed. A steady stream of water will moisten the soil and thus nourish the plants.
On the other hand, if watering young plants or seedlings, you cannot do without nozzles. The most suitable complement in this matter is the showerhead. It has a maximum diameter of 1.5 mm for each individual hole. With this fine irrigation, the soil does not overflow and the plants do not suffer any damage.
The steady flow of water will wet the soil and thus nourish the plants. On the other hand – if the watering of young plants or seedlings is done, then it cannot be done without a nozzle. The most suitable supplement in this matter is a showerhead. It has each individual hole with a maximum diameter of 1.5 mm. With this fine watering, the soil does not spill over and the plants do not get any damage.
The range of nozzles for garden watering cans is very wide. Every gardener can pick out the most suitable option as an additional accessory, the most important thing is to know the exact diameter of the spout.
- It is important to remember that the spout needs to be secured in place before use. If the attachment comes off while watering, there is a risk that the roots of the plant will be exposed to sharp and strong water flow and die.
- It is best to choose a nozzle with a removable filter, they are fairly easy to remove from the overall structure and clean.
- As for the price policy, nozzles are not considered expensive items and it is best to stock up on a few at a time, as they are quite small and easy to lose.
Garden watering can types
In any hardware store, you can find a variety of metal watering cans of different designs and capacities. The main criterion that can distinguish them is the purpose of the tool.
Such watering cans are designed for watering potted flowers and other plants. They are characterized by their small size: the volume of such devices does not exceed 1-2 liters. A small watering can is conveniently placed on a windowsill or bedside table next to a flower pot.
Gardening tools-garden watering can
The most common iron watering cans are common gardening tools used to water beds, shrubs, and young trees. Their volume is usually no less than 5 liters and no more than 9-10 liters. These tools have a wide neck and beveled edges so water does not spill when carried. Some models include extra funnels in the neck and special nozzles.
Decorative
Such watering can no longer be called tools because their only function is to decorate the interior of the house or garden. You can buy a ready-made decorative watering can, or you can decorate an old metal pot if it is worn out. Usually, these watering cans are filled with soil and planted with flowers. They are painted and varnished. The main thing is that this element should fit the rest of the interior of the room.
- nozzles with filters curved upward – for wetting tall crops
- Nozzles with screens pointing straight ahead – for watering medium-sized plants.
- For watering and fertilizing.
- For tank irrigation.
- For shallow drip irrigation.
Those who have several watering cans in their arsenal of different sizes, types, shapes, and designated nozzles don’t even remember the discomfort of watering with a hose or sprinkler
Plastic or metal: which is better?
On relatively small plots, this equipment is still indispensable. Garden watering cans are ideal for watering flowers, shrubs, and trees.
What are the benefits of plastic watering cans?
- Lightweight: easy to use for teenagers, disabled people, and the elderly, even if they are very large.
- Different colors and interesting designs – the material can be easily painted and changed during the production process, which allows us not to limit the imagination of manufacturers and surprise consumers with new models.
- Solid construction: Thanks to the absence of seams and joints, watering cans for vegetable gardens are stronger and prevent possible leaks.
- Vandal resistance – modern materials are perfectly resistant to harmful external elements and they do not corrode.
- Low prices allow anyone with financial means to buy watering cans, and the main thing – do not to buy low-quality fakes.
One of the disadvantages of such products – low-temperature resistance: plastic equipment can deform under the influence of both high temperatures and severe frosts.
Important tip: to check the quality of plastic directly in the store, you need to take the product to the light and look at it carefully. Cloudiness or dilution gives away cheap fakes. What are the characteristics of metal watering cans?
What are the characteristics of a metal garden watering can?
- High durability: metal is not afraid of damage from dropping on hard surfaces.
- The weight of stainless steel is both an advantage (it cannot be tipped over by the wind, cats/dogs) and a disadvantage (it is difficult to transport).
- Vulnerability to corrosion: occurs in the case of improper maintenance of equipment.
- Preventive effect – copper and zinc in iron watering can automatically produce sterilization and disinfection, and can make water plating.
- The high price is due to the high strength of the product, its durability, and the possibility of repair in case of leakage.
There is no single right decision when it comes to choosing materials. By studying the product market and its main characteristics, everyone will find their favorite.
How to choose a garden watering can?
After learning about the main types of garden tools and their characteristics, you can directly choose the necessary model.
It is necessary to carefully examine your favorite watering can. There should not be any cracks in the body of the product, even the smallest seam.
When choosing a metal device, it is important to carefully check the seams. As you know, small leaks can occur when the welds are not tight.
Careful consideration needs to be given to the nozzles provided
Any green plants, such as dill or parsley, should only be watered with dispersion nozzles. Higher water flow rates will only lead the bed astray and kill the plant.
To avoid looking for additional accessories, it is best to note the models with nozzle sets.
Special attention should be paid to the design of the spout of the watering can. It should be positioned as close to the bottom of the liquid container as possible.
If you need to know the exact amount of liquid used, you should choose a model with a scale on the body.
To make it easier to see the remaining water, the watering can not be a dark-colored watering can, but preferably white, beige, or yellow.
The volume of the container is an important feature when choosing a suitable model. 10 or 12-liter watering cans are only suitable for physically strong gardeners. For mature people, models up to 8 liters are best.
For watering outdoor planters, the smallest containers should be used. With them, it is easy to scoop water and lift them above their height.
Most of the older generation is engaged in vegetable and orchard gardening. Since they do not have the ability to move, it is better to consider watering can models of less than 5 liters. And arrange a large barrel around the site to collect rainwater so that you can always go and scoop up the liquid for irrigation.
Kits consisting of several watering cans and nozzles have become very popular recently. They vary in volume and size, the smallest being suitable for watering indoor plants, here in the middle and larger – work in the garden and vegetable garden.
Metal garden watering can
stand out for their strength level and weight. A metal product weighs twice as much as a plastic one (if you consider the same volume). Due to their weight, steel models are not suitable for all gardeners.
The advantages of this material include.
Long service life. Metal products can last for years or even decades with proper care.
Unaffected by climate: Steel parts do not react to frost or heat. It is not afraid to put this watering can in the hot sun or in sub-zero temperatures.
Cleaning effect: Quality metal tools with copper and zinc in their composition have an antiseptic and antiseptic effect on water.
When buying a metal watering can, you should be prepared in advance to take care of the needs of this tool. If the container is not dried, corrosion will form on its bottom over time. You should also keep in mind that metal is more expensive than plastic. Prices for quality steel watering cans start at $50.
Some gardeners recommend avoiding metal watering cans because these are made of welded construction. This design carries a greater risk of leaks because they depend directly on the quality of the seams.
Things to look for when buying
When choosing a watering can, gardeners have to consider a number of factors – from the purpose of use to the size of the area to be treated.
The following criteria are the most important.
- Volume. In stores, garden watering cans are available in volumes of 3, 5, 7, and 10 liters, and these options are considered to be the most common. The choice is based on the size of the garden (or vegetable garden) and the physical ability of the gardener. 10-liter containers are convenient for large areas because they do not require frequent refilling.
- Nozzle. Most models are supplied with a nozzle by default, but this detail is not always needed. When watering shrubs and trees, you need a powerful jet that waters directly from the spout. Seedlings and flowers need a sprayer to reduce the force of the water flow and disperse it. If you wish, you can purchase additional nozzles – for this, you need to make sure that the diameter of the nozzle matches the diameter of the model’s water outlet.
- Markings. Some models have special markings to control the amount of watering. This option is useful in the case of plant fertilization. A certain amount of water is needed to produce the solution and must be measured accurately.
- The number of handles. The dispenser is divided into models with one handle and two handles. The double handle makes it easy to change the position of the tool when watering and to hold it from both sides at the same time. One handle is located on the top of the tool, while the second is on the side. The double handle is most often installed on plastic models, but can also be found on metal models.
- Design features. The successful design of watering cans has two distinctive features – the spout is located near the bottom and the handle is not directly above the water hole. The first factor has to do with the ease of watering – the higher the spout, the more unused water remains at the bottom. The second factor is responsible for the speed of water intake. If the approach to the hole is blocked by the handle, it will take more time and effort to fill it.
It is not possible to buy a universal watering can that works for all tasks. Therefore, experienced gardeners have several models in their arsenal that vary in size. For small flower beds, use containers of 3-5 liters. To take care of shrubs and other large works, take copies of 7-10 liters.
What kind of garden watering can you use?
Plastic + Metal
All watering cans have a specific design. Therefore, it is recommended to choose a tool for a specific purpose. The plastic model is for gardeners who want a lightweight, inexpensive but short-lived tool. Metal models have a long life span but require regular maintenance. Often, gardeners combine several flutes in order to make the watering process as easy as possible.
How to choose an irrigation hose sprayer: an overview of the most popular products and their advantages and disadvantages
How to choose the best manual garden sprayer: types, important features, selection criteria, popularity and a review of 8 popular models, their advantages and disadvantages
How to choose the best battery-powered sprayer: the main features of the line, what to look for when choosing, review of the 5 main models, their advantages and disadvantages, rules of application of the sprayer
How to choose the best battery-powered sprayer: the main features of the line, what to look for when choosing, an overview of the 5 main models, their advantages and disadvantages, the rules of application of the sprayer.
Advantages and disadvantages
Despite the fact that the most popular are plastic watering cans, metal also has advantages.
- Strength and durability. Metal tolerates any mechanical damage, drops, or bumps very well. It tolerates sudden changes in temperature perfectly and has a longer life span.
- Decontamination. Zinc containers automatically sterilize the water used to water plants, while copper containers have a sterilizing effect. However, you must know that drinking water from these containers is dangerous to your health.
- Easy to maintain. Any gardener or florist who owns a metal watering can know how easy it is to repair it. A small welder and a suitable piece of material are all that is needed.
- Weight. While lighter tools are easier to use, the greater weight can be an advantage. Even strong winds won’t topple such a watering can, and small children or pets won’t drop it on themselves.
What to consider when choosing?
When buying a watering can be made of iron, copper, or zinc, you should pay attention to the following details
- The integrity of the body. It is best to check all seams and connections at once in the store. If possible, it is worth asking the seller to refill the tool with water. The body should not have any dents, cracks, or other defects.
- Volume and weight. If the iron container is difficult to lift even when it is empty, it will become simply out of reach when water is added. Careful consideration should be given to exactly how large a volume is needed to water comfortably. If the watering can be used to apply special fertilizers to vegetables and fruits, you can choose a model that is applied on the divided inner wall.
- The mouth. Eggplants or cabbages are to be watered from the roots, so watering can with a simple long spout is suitable. But herbs or berries need to be watered from above, so a dense large stream of water should be divided into many smaller streams to avoid damaging the fragile stems. You can do this with a special diffuser nozzle. If it is purchased separately, you need to check if it fits the water spout.
- Where does the spout of the spray can start? It is best to start almost at the bottom. In this case, you will not have to turn the heavy watering can and pour the remaining water from it, and there will be fewer trips to the faucet. There is no single right solution. Some will like the convenience, others will like the beauty of the tool. The main thing is that the buyer will be happy with his choice and that watering will serve him for many years.
Main purpose
The watering can is known to every child as a gardening item. This gardening device consists of a hollow container and a spout through which the water is distributed evenly to the necessary areas for watering. It is used to water garden plants and vegetable gardens, which will not be able to implement any technology. The device is suitable for both country houses and private homes.
Metal watering cans do not break when dropped, they are durable, but if they are made of low-quality materials, they will rust over time. They are available in the market in many varieties: there are colored enamel models and simple tin models. Such tools are popular because of their low price.
The first was the popularity of plastic watering cans because they are cheap, high quality, do not break when dropped, and do not rust. Manufacturers offered an unprecedented variety of shapes and colors. These are almost always molded products, designed without seams and joints, thus avoiding leaks. The only thing worth remembering is that you need to keep such tools away from the sun, as the thin plastic can warp and fade under the influence of sunlight.
The importance of using a watering can
When watering, the water should fall strictly on an area where the plant is growing. Drops of water on the leaves cause burnt areas to appear and the root system suffers from strong stress: it becomes bare and dries out and, as a result, the flower starts to hurt.
A simple watering can help to avoid this trouble. In the seventeenth century, a tool called a “watering can” first appeared in the homes of gardeners, and since then, their design has changed little, but there have been some innovations.
Today, you can find large containers of several liters as well as mini waterers, with the help of which it is very easy to water violets and other low-growing flowers properly.
In fact, the design of the watering can is very simple. The container can be presented in any shape and volume. The nose can also be made in various forms, for example, reduced or conical. Yes, and the handle of the product does not usually change its appearance. On models with a large capacity, the handle is located on the top of the container, while smaller models are equipped with a side handle.
Regardless of what they say about the advances in modern technology, common garden watering can have several advantages that make it clear that this is the most important item in the home.
- Its construction allows you to measure out the right amount of liquid to apply to the bed. It guarantees water conservation and is especially friendly to plants.
- Watering with a garden watering can water any plant, even those that are extremely difficult to reach with modern water pipes.
- The watering can is more fluid than its watering counterpart. There is no need to attach it to a pipe, and filling it with water is not that difficult.
You can use a rain barrel or even scoop up liquid from any nearby body of water.
Household Watering Can
For watering houseplants and young plants in pots or containers. In-room watering cans
Indoor watering cans are distinguished from other watering cans by their construction and size. They are relatively small (volume from 1 to 2.5 liters). Their thin spouts are longer than their bodies – for watering in hard-to-reach places. The design is more diverse than the garden version.
As for materials, almost all models are made of plastic. Less common are ceramics and metals, which, in addition to their primary function, also serve a decorative purpose. Painted steel watering cans with an aging effect deserve special attention.
Probably many of you have an old metal watering can in your shed, a rarity in the garden. It’s not so shiny and leaks in some places. What to do: buy the same again, or choose plastic “cosmetic”? If the choice is in favor of metal (zinc, copper, stainless steel), it is worth considering a few points.
RunSun Houseware design
As a global leader in Houseware, RunSun provides more than 2500 Houseware designs for Europe, America, and Australia.
Contact RunSun
Email: [email protected]
WeChat/Whatsapp: (+86)13246751686
Phone: +86 13246751686
Website:https://www.runsun-trans.com/
