RunSun Home Decor & Design

How does a watering can with sprayer work?

How does a watering can with sprayer work
How does a watering can with sprayer work
How does a watering can with sprayer work

Sprayer, short for spraying equipment. It is an apparatus that uses air suction to turn water or other liquids into mist and spray them evenly onto other objects and consists of a device of compressed air and a thin tube, nozzle, etc.

 

SPRAYER CLEANING TIPS
The use of an ordinary liquid sprayer or watering can with sprayer, just repeatedly cleaned with water 4-5 times and then inverted to dry.

 

If other liquids, such as the use of pharmaceutical spray plants, the stronger the case, you may wish to use muddy water to clean first, and then rinse with water 2 times.

 

Because of the strong adsorption capacity of muddy water, can be sprayed in the residual drug along with flushed away, so that both convenient and effective.

 

THERE ARE FOUR TYPES OF WORKING PRINCIPLES, AS FOLLOWS.

 

 

BERNOULLI’S PRINCIPLE.

Bernoulli’s principle says that in the same flow, the flow rate is large, the pressure is small; the flow rate is small, the pressure is large. The fluid will automatically flow from high pressure to low pressure.

In the passage of the trigeminal tube, the low-speed flow of water to the high-speed flow of air.

 

The water is torn into small drops by the high-speed air (imagine the water coming out of the faucet, at first the speed is slow, it is a column of water, but then the speed gradually increases and becomes a drop by drop).

 

These small drops of water sprayed out into a fog.

 

THE PRINCIPLE OF HIGH-SPEED WATER FLOWING INTO SMALL DROPLETS AFTER HITTING AN OBSTACLE.

The use of water pressure into the thin tube caused by high-speed water flow, high-speed water flow into the principle of small droplets after hitting the obstacle. The situation is like opening the faucet and plugging it with your finger. Household sprayer more with this structure, low cost.

 

CENTRIFUGAL FORCE WILL BE THROWN OUT OF THE LIQUID PRINCIPLE.

Is the high-speed rotation of the atomization disk using centrifugal force will be thrown out of the liquid, torn into small droplets similar to the situation when the umbrella rotation

 

ULTRASONIC ATOMIZATION PRINCIPLE.

Vibration can be caused in the water surface “wave”, the ultrasonic vibration frequency is very high, so its “wave” wavelength is very small, so its “wave” – small droplets of water is also very small, these small droplets of water into a fog.

 

Use a period of time to spray out, it should be too low air pressure, adjust the air pressure can be.